-+
Return To Main Page
April 22, 2024
Scaling up green hydrogen The Modular Hydrogen Platform (MHP) is your scalable electrolyzer systemModular, skid-mounted, ready-to-install: The H-TEC SYSTEMS Modular Hydrogen Platform (MHP) is an industrial scale electrolyzer system with unrivalled system efficiency. The Modular Hydrogen Platform is based on proton exchange membrane (PEM) technology, and it allows you to undertake large scale hydrogen production. Using renewable energy to power the electrolysis process, you contribute to the energy transition by turning water into green hydrogen to replace fossil fuels on an industrial scale. The H-TEC SYSTEMS MHP electrolyzer provides the highest possible electrolyzer efficiency, high availability, and proven maintenance concept, which results in low hydrogen production costs and stable safe operation. How much green hydrogen can you produce?The world needs lots of green hydrogen and demand is growing – the energy sector, process industry, aviation and marine transport are all hard at work trying to reduce greenhouse gas emissions. But not all businesses can reduce their carbon footprint through direct electrification, and where that is not possible, fossil fuels, including natural gas, must be replaced by net-zero fuels, such as green hydrogen and its derivates (produced in the power-to-x process) green ammonia, green methanol, and synthetic natural gas. That means green hydrogen production must scale up dramatically. The MHP system is available in 10 MW blocks. We can easily combine 10 blocks to achieve an electrolysis capacity of 100 MW and more.
Large-scale hydrogen electrolysisThe H-TEC SYSTEMS Modular Hydrogen Platform is a scalable indoor solution with 77% system efficiency for the industrial production of green hydrogen. Scale is achieved by combining 10 MW blocks to build systems with electrolysis capacity of 100 MW and more. Easy installation and expansionThe system is ready for indoor installation on pre-assembled skids. Modularity simplifies scaling and reduces costs. The highly standardized 10 MW blocks are based on proven S450 stack technology. Each 10 MW block is equipped with integrated process water treatment and electric power supply. The system can be optionally equipped with fresh water treatment and hydrogen purification system. Clean energy in high availabilitySystem reliability is guaranteed by our ingenious redundancy and service concept: critical components are installed redundantly and less critical elements can be replaced quickly thanks to an intelligent spare parts management with short reaction times. The 10 MW stack module consists of 12 cascades. Individual cascades can be switched off for maintenance or replacement of single stacks - this way the rest of the electrolyzer plant can maintain almost full performance without restricion during this time. Hydrogen from our PEM electrolysis is emission-free and climate-friendly and can be used directly for fuel cells. PEM stands for Proton Exchange Membrane. A PEM stack uses electricity to turn water into oxygen and hydrogen by electrolysis. The stack is the core working element of the electrolyzer. The more stacks you have, the more hydrogen you can produce. Our stacks are efficient, reliable, and enable a low levelized cost of hydrogen. The hydrogen produced can be used in a wide variety of applications. We have been making them in Germany for 25 years and we are ramping up hydrogen production with a new stack factory in Hamburg with a total electrolysis capacity of up to 5 gigawatts. Modularity increases the reliability of the electrolysis systems. There are independent controls at stack cascade level, single stacks can be exchanged quickly and easily. We offer a 360° service package with performance guarantee and 24/7 remote monitoring. Our customized maintenance contracts to ensure the best price-performance ratio. The efficient way to produce green hydrogenWe have always focused on optimizing efficiency and reliability to drive down the levelized cost of hydrogen (LCOH). Our 77% system efficiency for the MHP electrolyzers is now best in class and makes us one of the top electrolyzer companies. This is thanks to continuous work on the reliability of the stacks, fast start up times, and high availability. Our solutions can go from minimal load to nominal load in 30 seconds, ensuring that valuable renewable energy is fully utilized. This flexibility, coupled with high efficiency and reliability enables you to produce hydrogen at a competitive price. Backed by 25 years’ experience and strong partnersThe rush for green hydrogen feels like breaking news but, as one of the top electrolyzer manufacturers, we’ve been working on it for 25 years. Time for us to hone the reliability and efficiency of our core systems. Now it’s time to scale up green hydrogen and we have the backing of MAN Energy Solutions and VW Group, which gives us direct access to practical expertise in large-scale plant EPC and product scaling.
Spokane, Washington. 99212 www.exactrix.com 509 995 1879 cell, Pacific. exactrix@exactrix.com |